Pumps/Inflation

A lightweight and efficient mini pump with a low-profile pressure gauge. T-handle provides improved comfort and efficiency. - 25mm 6063-T6 aluminum sleeved barrel. - In-line pressure gauge is accurate to within +/- 2 PSI. - Reversible valve fits Schrader and Presta valves - Thumblock lever holds securely onto valve. - Locking T-handle improves ergonomics and provides better leverage when pumping. - 222mm total length - 120 PSI maximum pressure. - 142g

Efficient mid-high pressure mini pump with built-in extendable hose and easy-to-read dial pressure gauge. Achieves a higher maximum pressure with less effort. - 20mm 6063-T6 aluminum barrel. - 32mm dial gauge is accurate to +/- 2 PSI. - TIPFLIP reversible valve with alloy cap and alloy locking lever, fits Schrader and Presta valves. - 160mm extendable hose relieves stress on valve stems. - 268mm total length. - 110 PSI Maximum pressure. - Weight: 125g

A lightweight workhorse pump. Perfect for family use in the garage or to throw in the back of the car. Inflation needles optimize potential non-bike uses. - Stable (235mm x 120mm) fiber composite base - 480mm Fiber composite barrel and pump shaft - Fiber composite handle - 85cm premium quality hose - Precision 51mm mid-mounted gauge - Headrush dual connector instantly fits Presta or Schrader valves - Inflation needles included - 120 PSI Maximum pressure, suitable for most bicycle types - 750g

A durable and accurate shock pump. - Lightweight 6063-T6 aluminum construction. - 300 PSI maximum pressure. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided hose ensures long-term durability. - Bleed valve for fine-tuning pressure. - 365mm total length. - 185g

The ultimate pump that should be in every cyclists garage. Air stroke volume is optimized for high pressure but is great for general bicycle use as well. Inflation needles optimize potential non-bike uses. - Stable (240mm x 130mm) fiber composite base - 520mm steel barrel with high strength steel pump shaft - Dual compound premium handle - 110cm premium quality hose - Headrush dual valve connector with alloy valve caps - Precision 51mm mid-mounted gauge - Headrush connector instantly fits Presta or Schrader valves - inflation needles included - 160 PSI Maximum pressure, suitable for all bicycle types, but ideal for 60- 160 PSI tires - 1210g

A dual-purpose suspension fork/rear shock pump with a unique dual-pressure gauge design to facilitate fine-tuning of the unique air pressure requirements for each shock. Eliminates the need for 2 shock pumps. - Lightweight 6063-T6 aluminum construction. - Dual-face gauge ensures accurate pressure for rear (300 psi) or front (110 PSI) shocks. - Accurate to +/- 2 PSI. - No-loss thread on valve ensure accurate pressure remains in shock when removed. - Double-braided extended hose, for repeated use, and long-term durability. - Bleed valve for fine-tuning pressure. - 383mm total length. - 194g

A clever track pump that's optimized to work with both low-pressure/high volume (mtb) and also low-volume/high-pressure (road) scenarios - Ingenious dual-stage gauge provides large-scale, high-resolution 0.5PSI-accuracy from 0-30PSI, before converting to regular, lower resolution scale for the remaining 30-160PSI - A must have for any multi-bike household - Stable Steel base & barrel body with a high-strength steel pump shaft and 100cm premium quality hose - Headrush dual-valve connector is compatible with both Schrader and Presta valves without disassembly and built-in bleed valve allows for easy adjustments - Easy view 3 dual-stage gauge - 160PSI maximum pressure - Weight: 1730g

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

Crank Brothers Klic HP sports a revolutionary design that has a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-pressure portable hand pump with hidden magnetic hose - Premium pump with flexible rubber hose to allow for easy inflation. - Features include a Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HP (high pressure) version recommended for tires 45c and narrower. - All Klic pumps come with a bottle cage bracket mount. - Length 220mm - Pressure 120psi / 8.3bar - Weight: 115 grams

Crank Brothers Klic HV Gauge features a revolutionary design that sports a hidden flexible hose hidden inside the pump body. A magnetic head and twisting collar allow the hose to be attached easily and keeps debris out. - High-volume portable hand pump with hidden magnetic hose and pressure gauge - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use – perfect for those stealth air-strikes! - Features also include an air pressure gauge, Presta/Schrader valve adapter, magnetic head with twisting collar, and a folding and locking handle. - HV (high volume) version recommended for tires 1.8” wide and larger. - All Klic pumps come with a bottle cage bracket mount. - Pressure 110psi / 7.6bar - Weight: 150 grams

Crank Brothers' Gem Floor Pump overs versatility and simplicity in an easy-to-use floor pump. What else do you need? - Foot activated high pressure / high volume switch - Wide stamped steel base for easy pumping - Corrosion resistant aluminum body - Presta /Schrader convertible head - Hidden needle adapter & plastic valve adapter - 160 psi / 11 bar - Bar / psi analog gauge

The high-pressure portable hand pump with hidden hose, pressure gauge, and co2 inflator. Details - Premium pump with flexible rubber hose that hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include a concealed co2 inflator (Presta only), air pressure gauge, magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - Hp (high pressure) version recommended for tires 45c and narrower - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 120psi/8.3bar - Warranty: 5 years - Weight: 170g

The high-volume portable hand pump with hidden magnetic hose, pressure gauge, and co2 inflator. Details - Flexible rubber hose hides inside the body of the pump when not in use—perfect for those stealth air-strikes! - Features also include an air pressure gauge, concealed co2 inflator head (Presta only), magnetic head with twisting collar, a folding and locking handle, and a Presta/Schrader valve adapter (fully threaded Presta valve bodies only) - HV (high volume) version recommended for tires 1.8" wide and larger - All klic pumps come with a bottle cage bracket mount Specs - Length: 260mm - Pressure: 110psi/7.6bar - Warranty: 5 years - Weight: 186g

The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. PUMP VOLUME A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. FAST-ON HEAD Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.- Crafted from 6061-T6 aluminum with a durable textured machined finish. - 2 Sizes: High Volume 100cc & Compact 70cc - 1-1/4 diameter x 10 length for 100c (160g) - 1-1/4 diameter x 7 length for 70cc (135g) - 100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule - 70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2 - Fast-On Head (Presta Only) - No threads or locking levers - Integrated CO2 Inflator - Fully Sealed, Weatherproofed Internals - Includes Bottle Cage Mount - Material: 6061-T6 - Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

Small enough to carry along yet big enough to pump efficiently. The PMP-4.2 comes with a handy holder that bolts under a water bottle cage and holds the pump securely. All-aluminum barrel construction ensures long life and smooth operation. - Presta- and Schrader-valve compatible - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage - Maximum pressure 90 PSI/6bars - Approximate weight 4.6oz/130 grams - 10.5 inches in length (265mm)

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

The PFP-10 is a reliable floor pump that's equally at home in the garage, workshop or trailhead, with a long hose, extra-large foot pads and a giant easy-to-read gauge. The locking universal head automatically adjusts to fit both Presta and Schrader valve stems. - Compatible with Presta and Schrader valves - Maximum pressure: 160 PSI (11 bar) - One-year warranty — see Park Tool Limited Warranty

Built and designed for bicycles, the INF-2 utilizes a redesigned, more durable, dual-sided, 360º rotatable Presta and Schrader head. The INF-2 also sports a new, lighter weight body and a redesigned trigger to facilitate multiple hanging options. It features a built in pressure gauge (0–160 psi, 0–11 bars) with a protective gauge boot, and the body accepts any 3/8" NPT male threaded fitting. Built for everyday shop use and 100% rebuildable!

- Available in 16g & 25g packs. - 5 x threaded CO2 cartridges per pack, including 1 freeze protector sleeve with unique closed base design - Packaged using recycled cardboard header cards and biodegradable bags

"Everyone knows that a straight line is the fastest line! That’s why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle. It's as small and lightweight as possible, so it’s easy to carry in your pocket, bag or strapped to your bike. Made from CNC’d 6061 aluminum, and with a patent-pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colors. KEY FEATURES: - Available in 12x Chris King colors - Unique Patent Pending compact straight line design for maximum airflow - Simply push down to inflate - Contains 1x inflator head (CO2 cartridges and freeze protector sleeve sold separately) - Presta valve compatible

Everyone knows that a straight line is the fastest line! That’s why Peaty's made their holeshot CO2 tyre inflator straight, rather than bent at 90 degrees. This straight line design enables faster airflow for rapid inflation, and creates less stress on your tubeless valves when you’re using it because you’re coming at the valve straight on rather than at a 90 degree angle. It's as small and lightweight as possible, so it’s easy to carry in your pocket, bag or strapped to your bike. Made from CNC’d 6061 aluminum, and with a patent-pending valve design, the details of Peaty's inflator heads have been agonised on - from the exact rubber compound of the o-rings to the awesome chris king anodized colors. Not stopping at the inflator head, Peaty's applied the same level of detail and quality in making a high-quality CO2 cartridge sleeve. far from a cheap strip of neoprene, our freeze protector sleeve is made from temperature-resistant silicone and has a unique closed base to stop your hand from freezing to the cartridge, no matter how you hold it - even without wearing gloves. KEY FEATURES - Available in 12x Chris King colors - Unique Patent Pending compact straightline design for maximum airflow - Simply push down to inflate - Unique closed base silicone Freeze protector sleeve prevents your hands from freezing, even without gloves - Each kit contains 1x inflator head, 2x CO2 cartridges and 1x freeze protector sleeve

Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen

The Micro Blast is what you need for easy inflation on the road or trail. This easy to use CO2 inflator head comes with two 16 gram threaded cartridges and a sweet little foam cartridge cover that protects from cold cartridges while in use. The simple spring push design makes it easy to inflate your Presta valved tube. - Fits all threaded CO2 cartridge sizes - Alloy mini head with threaded spring push design - Includes two 16g CO2 cartridges - Includes one reusable foam cartridge cover to fit 12g or 16g cartridges

Adapts Presta valve stems for use with standard Schrader pumps.