Filter By:
- Parts & Accessories (41)
- CO2 Inflators (26)
- Floor Pumps (34)
- Frame Pumps (3)
- Mini Pumps (47)
- Shock Pumps (10)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Pumps/Inflation

$67.49
Topeak's RaceRocket MT boasts aluminum construction for superb function, durability, and max pumping power. Its small size easily fits into a jersey pocket and with a capacity of 90 psi and a large-diameter barrel you'll have no problem getting rolling again. The RaceRocket's extendable hose with SmartHead fits both Presta and Schrader valves and lets you pump from a more comfortable angle, lessening chances of valve breakage.

$119.99
Get accurate and precise results every time with RockShox's High-Pressure Digital Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large digital BAR/PSI readout. It runs off one CR2032 battery (included) and the hose swivels 360-degrees to fit anywhere.

$54.99
Keep your suspension pressure dialed-in with RockShox's High-Pressure Fork/Shock Pump. It features an aluminum barrel with an ergonomic handle, a handy finger-tap bleed adjust button for fine-tuning settings, and a large gauge. The hose swivels 360-degrees to fit anywhere.

$6.99
There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

$10.99
Park Tool's Pump Rebuild Kit contains one #1081 head as well as one #1087 plunger gasket for their PFP-3, PFP-6 and PFP-8 floor pumps.

$4.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

$78.00
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
PUMP VOLUME
A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market.
FAST-ON HEAD
Firmly push the pump head onto the Presta valve until it bottoms out, then pump. With our fast-on head the valve stem is securely supported so there's no chance of bending, breaking or unseating the valve and no chance of unscrewing your valve core when you remove the pump.
EDC PUMP SPEC
2 Sizes: High Volume 100cc & Compact 70cc
1-1/4" dia x 7" for 70cc (32mm dia x 178mm)
1-1/4" dia x 10" for 100cc (32mm dia x 254mm)
100cc Pump holds EDC Tool & a 20g CO2 or EDC Tool & the Storage Capsule
70cc Pump holds EDC Tool (no Storage Capsule) or a 20g CO2
Fast-On Head (Presta Only) - No threads or locking levers
Integrated CO2 Inflator
Fully Sealed, Weatherproofed Internals
Includes Bottle Cage Mount
Material: 6061-T6
Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
Colour: Black
Patents Pending
Inflator Instruction
thread CO2 cartridge fully onto inflator head
press inflator head onto presta valve
to inflate back off CO2 cartridge a half turn
tighten CO2 cartridge to stop inflation

$44.99
The Pocket Drive is an amazingly compact and lightweight bicycle hand pump featuring plenty of pumping efficiency. It's constructed from durable CNC machined aluminum and has a handle that's lightly knurled for slip-resistant operation. With its overlapping handle and integrated ABS Flex Hose, the Pocket Drive offers performance unmatched for its size. The pump is Presta and Schrader valve compatible, and it's completely rebuildable for continued use at a high level.
- 140mm, 79g
- 160 psi, 11 bar
- CNC machined aluminum construction with compact overlapping handle
- Presta and Schrader valve compatible ABS Flex Hose
- Includes Composite Matrix frame mount

$25.99 - $29.99
Lezyne's convenient Twin speed Drive CO2 inflator is compact and lightweight. Its aluminum head is compatible with both Presta and Schrader valves, and uses a simple twisting action for easy inflation. And, it accepts all threaded CO2 cartridges.

$9.99
Want a super-easy way to fix a flat? If you have tubeless tires on your mountain bike, all you need is Genuine Innovations' Tubeless Tire Repair Kit. No interior repair is needed, so you don't have to remove the tire. Just plug the hole with the self-vulcanizing plugs, inflate and ride away. The kit includes an insertion tool and five rope plugs.

$64.99
The ultimate pump that should be in every cyclists garage. Air stroke volume is optimized for high pressure but is great for general bicycle use as well. Inflation needles optimize potential non-bike uses.
- Stable (240mm x 130mm) fiber composite base
- 520mm steel barrel with high strength steel pump shaft
- Dual compound premium handle
- 110cm premium quality hose
- Headrush dual valve connector with alloy valve caps
- Precision 51mm mid-mounted gauge
- Headrush connector instantly fits Presta or Schrader valves
- inflation needles included
- 160 PSI Maximum pressure, suitable for all bicycle types, but ideal for 60- 160 PSI tires
- 1210g

$62.99
A dual-purpose suspension fork/rear shock pump with a unique dual-pressure gauge design to facilitate fine-tuning of the unique air pressure requirements for each shock. Eliminates the need for 2 shock pumps.
- Lightweight 6063-T6 aluminum construction.
- Dual-face gauge ensures accurate pressure for rear (300 psi) or front (110 PSI) shocks.
- Accurate to +/- 2 PSI.
- No-loss thread on valve ensure accurate pressure remains in shock when removed.
- Double-braided extended hose, for repeated use, and long-term durability.
- Bleed valve for fine-tuning pressure.
- 383mm total length.
- 194g

$39.99
- Z-switch System (Presta, Schrader and Dunlop compatible)
- Wide Gauge
- Steel Base for better stability
- Ball and Bladder Heads
- Max Pressure 9 bar / 130 psi
- Hose length: 800mm

$53.99
- Z-switch System (Presta, Schrader and Dunlop compatible)
- Gauge with a magnifying lens
- Integrated locking hook
- Composite Base for better stability
- Ball and Bladder Heads
- Max Pressure 11 bar / 160psi
- Hose length: 1100mm

$79.99
- Z-switch System (Presta, Scharader and Dunlop compatible)
- In-line Gauge
- Ergonomic and lockable T-handle
- Double base for better stability
- Carrying bag included
- Max Pressure: 10 bar / 145 psi
- Hose length: 610 mm

$25.99
Easy to use and compatible with Presta and Schrader valves, the Twin graph is an intuitive gauge that allows an efficient measure of your tire's pressure.
- Fits Presta/Schrader
- Accurate up to 160psi
- Shows PSI and bar
- Weighs only 37g

$43.99
Topeak's CO2-Bra CO2 Inflator gives you speed and convenience when it's time to fix a flat. A flip-up thumb lever puts precise flow control in your hands while the ergonomic handle gives you a better grip while inflating. An integrated safety ring prevents accidental cartridge puncture during storage. The CO2-Bra accepts threaded 16g cartridges and works with both Schrader and Presta valves.

$199.99
The king has returned to rule! The new JoeBlow Ace DX features an innovative three-stage design that achieves both high pressures and high volume in record time. Stage one opens both barrels for big volume to reach 60 psi with 30% less effort than standard floor pumps. Stage two uses the main barrel only for pressures up to 120 psi while stage three engages the small barrel to achieve an amazing 260 psi. Two tone padded handles, wide stable base and new 4” base mounted analog gauge make inflation easy. The new SmartHead DX1 automatically adjusts to fit Presta and Schrader valves without swapping parts and the lower profile air release button makes getting the right pressure easy. Includes ball and air bladder type inflation needles.
- SmartHead DX1 full metal pump head w/ air release button & x-long hose
- Gauge: 260 psi / 18 bar; 4” base mount analog
- Base: Aluminum/Rubber
- Barrel: Anodized aluminum
- Handle: Oversize dual tone
- Weight: 2.45 kg / 5.4 lb
- Size: 74 x 28 x 22 cm/29.1” x 11” x 8.7”

$52.99
Topeak's Joe Blow Max HP quickly inflates tires with a durable steel barrel, a sturdy composite base, a padded handle, and a tight-sealing TwinHead that fits Presta, Schrader and even Dunlop valves. You'll also appreciate the extra-long hose and big, easy-to-read gauge.

$169.99
The aero-shaped barrel and wide steel base provide stability when pumping and the 3” top mounted gauge is easy to read up to 200 psi (14 bar). The large padded handle provides comfort while the extra-long and tangle-free hose can even reach wheels on bikes mounted in a stand. The SmartHead DX3 with lower-profile air-release button automatically adjusts to fit either Presta or Schrader valves and makes getting the right pressure a simple task.

$74.99
Air up your bike tires in a hurry with Topeak's JoeBlow Race Floor Pump. Its steel barrel, sturdy composite base and oversize padded handle make inflating high volume tires an easy task. For versatility, its easy SmartHead pump head tightly grips both Presta and Schrader valves, and the air release button lets you quickly fine-tune your pressure. You'll also appreciate the easy-to-read top-mount gauge and the extra-long hose.

$124.99
This clever dual-gauge floor pump was exclusively designed for low pressure Fat-Bike tires and moderate pressure MTB tires. A massive oversized barrel is 1.5 times larger than a standard floor pump and delivers large air volume to fill oversized tires quickly. A 30 psi (2 bar) gauge shows precise low pressure for Fat-Bike tires while the 75 psi (5 bar) gauge shows higher pressures for MTB tires. An air release button on the TwinHead™ allows for fine-tuning pressure.

$124.99
This pump is equipped with a hardened steel base, solid steel barrel, and an easy to read top mounted analog gauge. An extra long hose with a TwinHead pump head makes it easy to reach valve stems and the integrated mini tool carrier keeps what you need for light maintenance close at hand.

$114.99
This unique mountain bike specific floor pump features a super-sized barrel that inflates tubes nearly 50% faster than normal floor pumps. It delivers the higher volume required for large off-road tires. The extra-sensitive 3" easy-to-read low pressure analog gauge helps dial in the proper pressure while the large steel base provides stability.
- TwinHead DX5 works with Presta, Schrader, and Dunlop valves
- Oversize padded handle
- Barrel/Base: Painted steel
- Gauge: 60psi / 4bar, 3” middle mount analog
- Volume Per Stroke: 722 cc
- Added Features: Attachments for inflating sports balls and bladder heads, Hose dock
- Size: 72 x 26.6 x 14.2cm / 28.3” x 9.1” x 6.7”
- Weight: 2.3kg / 5.07lb

$124.99
An easy-to-read mid-mounted digital gauge delivers accurate tire pressure readings up to 160psi / 11bar. Hammer type TwinHead DX5 pump head with an extra-long, tangle-free hose makes it easy to reach valve stems. A durable steel barrel and large steel base with ergonomic padded handle make it easy to get your ride up to pressure fast.
- Head: Hammer type TwinHead DX5, Presta / Schrader / Dunlop valves with extra-long 360 pivot hose
- Barrel: Painted steel
- Gauge: 160 psi / 11 bar, Mid mounted flip-down digital (Tolerance: < 100psi ± 1 psi / > 100psi ± 1%)
- Unit: psi, bar, kg / cm²
- Battery: CR2032 x 1 (included)
- Volume Per Stroke: 318cc
- Handle: Oversize padded / Dual density polymer
- Base: Hardened steel
- Cushion rubber for digital gauge protection, auto off, Ball / bladder heads, hose dock
- Size: 68 x 25.4 x 18cm / 26.7" x 10" x 4.6"
- Weight: 1.8kg / 3.97lb

$29.49
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.

$48.99
Topeak's Mini Dual DXG is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock SmartHead ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

$36.49
Topeak's Mini Dual G is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. Topeak's thumb-lock head ensures an airtight seal on both Presta and Schrader valves and the built-in gauge lets you top off your tires with precision.

$55.99
Larger barrel version pumps more air volume for MTB riders. Large integrated 1-1/8" diameter easy-to-read analog gauge provides the perfect inflation every time. Dual-Action (DA) doubles volume with each stroke and inflates tires up to pressure fast. Integrated dust cap keeps pump head clean and thumb lock lever ensures an air-tight seal.
- Head: Presta / Schrader / Dunlop with integrated dust cap
- Barrel: Aluminum
- Thumb Lock/Handle: Polymer
- Capacity: 60psi / 4bar, 1-1/8” Analog
- Volume Per Stroke: 82 cc (pull + push)
- Side mount bracket secures to water bottle bolts
- Size: 25.3 x 4.6 x 3.4cm / 10” x 1.8” x 1.3”
- Weight: 152g / 5.36oz
Page 1 of 6
Next page