Cycling Apparel + Gear

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Carry just the necessities in Topeak's Small Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

- AXS enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED and Force eTap AXS cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48 - Bolt Circle Diameter (BCD): 107 BCD - Power Meter Type: ANT USB

Aerodynamic seat bag holds tubes, tools and other repair items. Mounts with our innovative Quick Release Buckle system to fit all railed saddles. Specs: - BAG ATTACHMENT: Nylon straps / Buckle - MATERIAL: 1200 denier polyester - SEATPOST DIAMETER: Fits 27.2 - 34.9 mm - SIZE: 16 x 8 x 7.5 cm / 6.3" x 3.1" x 2.9" - CAPACITY: 0.41 L / 25 ci - WEIGHT: 85 g / 2.99 oz - ADDED FEATURES: 3M reflective strip, Safety light clip

Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Carry just the necessities in Topeak's Micro Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.

The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face mountain bike helmets. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready mtb helmets in the market today. - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible 3-position adjustable visor - 360 fit system allows you to dial in your perfect fit every ride - Note: Avoid exposure to aerosol sprays like bug repellent and sunscreens as they can cause your helmet's finish to peel - Weight: 360 g, medium

Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit

When a mechanical problem has you feeling lost in space, the Alien II is the extraterrestrial that will ensure you don't have to phone home. Its molded-plastic body provides an excellent gripping surface and splits in two with a press of a button. Tools include: 2, 2.5, 3, 4, 5, 6, 8 and 10mm Allen wrenches; 8, 9, 10mm box wrenches; Phillips and regular screwdrivers; a universal chain tool; 14- and 15-gauge spoke wrenches; a stainless-steel knife; a T25 Torx wrench for disc brakes; and a compartment for 2 chain pins. There's even a handy bottle opener for after the ride.

Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

Features a construction process that combines rigid molded panels with flexible 600 denier fabric for rigidity and water repellency. Large capacity MTX TrunkBag containing one main divided compartment with two expandable pannier side panels and rear water bottle holder. Our unique construction process provides rigidity and water repellency. Compatible with all MTX QuickTrack® racks with attached side frames. MTX Dual Side Frames are required when using side panniers on MTX BeamRacks. - Insulated main compartment with molded EVA foam sides, top and bottom - Large capacity main compartment with 2 side panels with expandable panniers - Includes shoulder strap and carrying handle - 3M reflective trim - Elastic top bungees - Compatible with the MTX Quicktrack 2.0 System

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

- Weatherproof resin wicker and powder-coated steel frame construction - Quick Release mounting bracket with foam-coated handlebar hooks that reduce scratching - Fits 22.2/25.4/31.8mm handlebars - Comfortable foam coated carry handles - Easy installation - Mesh bottom to retain small items - Dimensions: 28 x 38 x 24cm (L x W x D) - Load Capacity: 7 kg / 15lbs

Durability-Focused Mountain Bike Gloves The Defend Gloves are a perfect mix of lightweight top hand material and a minimal, yet extremely durable palm. The stretch mesh finger gussets (the fabric between your fingers) increases flexibility as well as helps channel air through the glove for superior comfort. Touchscreen compatibility is an additional feature for taking those epic mid-ride photos when the weather breaks. - 4-way stretch polyester construction - Single-layer Clarino palm with strategically placed perforations - Stretch mesh finger gussets for improved airflow and movement - Compression-molded cuff for secure fit - TruFeel internal texture for heightened feel and control of levers - Touchscreen compatibility - Hook-and-loop wrist closure style MATERIALS - 40% nylon Cordura, 28% nylon66, 20% PET, 12% spandex

The Fox Racing Dirtpaw Glove has armored knuckles, padded palm, and superior flex-point comfort to remain the top choice for the entry-level rider. The hoop and loop closure provides a secure fit, and built-in stretch gives you maximum dexterity. - Stretch polyester construction - Padded, single layer Clarino palm - Stretch mesh finger gussets - Padded knuckles - Hook and loop wrist closure - Silicone print at finger tips for lever grip

When you're flying down that gnarly overgrown trail, the Flexair Arcadia Jersey has got you covered, bringing some legendary Fox energy and performance to your ride with a design that looks as fast as it feels. With its coveted Flexair breathability and TruDri sweat-wicking fabric to keep you cool and dry, it also boasts construction details that'll ensure total mobility to dodge on a dime. Should you mistime your dodge, the abrasion-resistant sleeves and panels on the shoulder will guard your limbs against those errant trail flings.

Like all products in the MTB Ranger collection, the Ranger Gel Gloves offer performance and quality that is typically only found in much more expensive gloves. With these gloves, however, you get added protection from strategically placed gel padding on the palm. Pair that with the low profile cuff and excellent fit, and touch screen compatible fingertips at the index and thumb, these are highly versatile mountain bike gloves that work well in almost any discipline.

A gel version of our best selling glove with touch screen compatible digits The Ranger Gel Gloves offer performance and quality typically only found in much more expensive gloves. With these gloves, however, you get added protection from strategically placed gel padding on the palm. Pair that with the low profile cuff, excellent fit, and touch screen compatible fingertips at the index and thumb, these highly versatile mountain bike gloves work well in almost any discipline. - Low-profile cuff - Absorbent micro-suede thumb - Gel palm for improved protection - Touch screen compatible

Don't let the half-pint stature fool you, Mirrycle's little Incredibell Brass Solo packs the beautifully resonant ring of solid brass. Its compact size and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and it rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 24mm (.86" – .95") outside diameters

- Quick Release mounting bracket - Foam coated carry handles make this a comfortable shopping basket - Powder-coated steel construction - Easy and simple installation - Foam coated mounting hooks reduce scratching - Mesh bottom makes this suitable for small items - 25 x 35 x 22cm (W x H x D) - Fits 22.2/25.4/31.8mm Handlebars

Proven MIPS Coverage for Superior Open-Face Performance The Speedframe MIPS Helmet has premium features usually meant for much more expensive helmets. A MIPS liner, goggle compatible 3-position visor, and our 360-degree fit make the Speedframe one of the best values in an open-face helmet. Add in the legendary aggressive Fox design DNA, and you have one of the most shred-ready trail helmets in the market today. Features - Proven MIPS impact protection system reduces rotational forces in a crash - Removable, washable moisture-wicking comfort liner - Optimized venting with channeled, in-molded EPS provides efficient cooling - Goggle compatible, 3-position adjustable visor - 360 Fit System allows you to dial in your perfect fit every ride - Weight: 360g Sizing - Small = 51 – 55cm - Medium = 55 – 59cm - Large = 59 – 63cm Certifications - CPSC - EN 1078 - AS/NZS 2063

A clever handlebar bag that converts to a waist pack. Great for cameras, cell phones and other essentials you want close at hand. Rain cover included. - Divided main compartment, Two side zip pockets - Material: 1800 denier nylon - Max Load: 5kg / 11lb - Fully padded - Waist Belt, Carry handle, Rain cover, Yellow lining - QuickClick Handlebar Mount (Fixer 8) - Fits 25.4, 28.6 & 31.8mm handlebars - Size: 22 x 18 x 13cm / 8.7" x 7.1" x 5.1" - Weight: 334g / 11.78oz

Definitive multi-use versatility - Durable Nylon mini-ripstop fabric with DWR finish - Includes Clickfast detachable liner with 200-series pad - Zipped thigh vents with mesh inserts - Zipped hand pockets, cargo pockets, and large rear map pockets - Durable, seamless seat panel - Rear elasticated waistband and adjustable belt - High Mobility Multi-use Versatility - HuMMVee