Chainrings

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner

Eagle Technology creates the smoothest, quietest, longest-lasting, and most efficient drivetrains we've ever made. The radical new look and feel of our X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with the new Eagle chain to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. - X-SYNC 2 chainring design increases chain retention, wear life, and reduces friction and noise. - Designed to be used with Eagle chain - Non-Boost 6mm offset

The X-SYNC 2 Bosch Direct Mount Chainring is built with the needs of E-MTB riders in mind, and incorporates the same X-SYNC 2 Eagle chain management technology found in every SRAM 1x drivetrain. - Sharp, narrow tooth profile and rounded chamfer edges help manage a deflected chain - Mud-clearing recesses - An integral component of the SRAM 1x drivetrain - Speeds: 12 - Material: Steel

Our boost oval chainring features our highly sought-after tooth profile for the best 1x drivetrain performance. Combine this chainring with a modern-day clutch derailleur and never worry about dropping a chain again. Made specifically for use with any cranks which use a *SRAM interface. Designed for use with 148mm Boost frames. - Oval shape allows for greater power, increased traction, and a smoother spin - Blackspire's oval shape has an ovality of 12-13% with a timing of 115 degrees after the top-dead-center - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM Cinch cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics

The SRAM X-Sync Steel 1x chainrings are the perfect replacement ring for the cost conscious with added durability of steel. The same SRAM X-Sync technology at a price well below competitors’ imitation “narrow wide” rings. Best performing chainrings at the best price. - Compatibility: Compatible with all SRAM 1x cranks, DM 28-tooth ring is not compatible with 30mm cranks that require a 0mm offset ring

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

Shimano Ultegra R8000 Series Chainrings are designed for use with Shimano's 11-speed Ultegra crankset.

- Shimano, 44T, 9 sp, BCD 104mm, 4-Bolt, Deore FC-M590, Outer Chainring, For 22/32/44, Aluminum, Grey, Y1LD98100

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.

GET A NO COMPROMISE NARROW-WIDE CHAINRING WITH PERFECT CHAINLINE AND SAVE MORE THAN 35G OVER A STOCK SHIMANO RING Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit. - Saves over 35g versus stock ring (32T) - Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. - Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) - Aggressive crud chamfers for awesome mud shedding performance and extended ring life. - Reinforced Wide tooth design provides maximum ring durability when run without a bash. - Made from 6mm hard wearing 7075-T6 aluminum plate SPEC - Material: 7075-T6 - Chainline: 49mm - Weight: 45g (30T), 51g (32T), 60g (34T) Compatible with: - 9, 10, 11 and 12 Speed SRAM Chains. - 11 speed Shimano XT M8000 1X and 2X armsets - 11 speed Shimano SLX M7000 1X armsets - 11 speed Shimano MT700 2X armsets - 12 speed Shimano MT510 1X armsets NOT Compatible with: - 12 Speed Shimano/Hyperglide+ Chains - 10 speed Shimano XT armsets Colors: Black

Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)

Replacement chainrings in 110mm and 130mm BCD for SRAM 11-speed Yaw speed road cranks. Replace worn out rings or swap to change gearing for specific uses.

Customize your ride with The Helix Race Direct Mount Chainring. Made from ultra-lightweight and durable AL-7075-T6, this chainring offers compatibility with SRAM™/Shimano™ chains and features a flip-flop design for chain line adjustment. With bold color options that match e*thirteen's popular components, it's the perfect addition to your dream rig, ensuring maximum strength and longevity. - E*thirteen QuickConnect Direct Mount rings include 1mm spacers, which allows them to be run on legacy cranks (TRS/LG1/XCX), as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile is compatible with both Shimano and SRAM chains in both 11 and 12-speed - Can be flipped to provide either a 52 or 55mm chainline

Shimano Dura-Ace 9000 11-Speed Chainrings. - Chainring BCD: 110 Shimano Asymmetric - Color: Black - Defined Color: Black - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner

- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum

The Pathfinder sprocket is 8mm thick and uses a unique 9-sided design that allowed WTP to integrate the sprocket mounting location into the spoke pattern, resulting in a super-clean looking sprocket with plenty of strength and longevity even for the most savage rider out there. - Full CNC 6061-T6 alloy - 9 rotation points for longer life - Sunken adapters for perfect chain line - Made to fit directly on to a 24mm crank spindle, includes adaptors for 19mm and 22mm spindles

This is a 96mm BCD chainring for a 1X chainring for XTR M9000 crankset with the proven chain retention of our Drop-Stop® chainring. They fit only the Shimano XTR M9000 and M9020 cranksets (race and trail respectively). They have an asymmetrical 96 mm BCD with built-in threaded standoffs to provide the ideal 1X chainline. - Fits 96 BCD XTR M9000 and M9020 cranksets - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - These rings fit on the Shimano XTR M9000 and M9020 1x or 2x cranksets - Use only the stock Shimano XTR chainring bolts (M7x.75) - You will not use the stock bolt caps when mounting this ring. The stock bolts will thread into the chainring's standoffs from the outside of the crankset - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention) - Chainline - 49 mm for 30-34T and 50 mm for 36T. Provides a great chainline on most boost bikes - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. DROP-STOP A - Wolf Tooth Drop-Stop A is the original patented wide/narrow chainring compatible with multiple drivetrain brands including 9, 10, 11, and 12spd SRAM Eagle, KMC, Wippermann, etc. - NOT compatible with 12spd SRAM Transmission (T-Type) Flattop, 12spd Shimano HG+, or 12spd Campy DROP-STOP ST - Compatible with 12spd Shimano Hyperglide+ chain and 12spd KMC chain only - Symmetric Trapezoidal (ST) tooth shape is optimized for Shimano HG+ chain Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck. Tech Specs: - Weight: 30/41g | 32t/50g | 34t/59g | 36t/69g - Material: 7075-T6 aluminum - Made in the USA

Rugged durability comes naturally to the Eagle T-Type direct mount chainring. Finished with a distinct, dual-spoke design your shifting will never be compromised. Available in three different tooth counts, there is ample room to refine and customize your bike’s feel. - 8 Bolt direct mount - 30-38T range and +3mm offset variants - Compatible with T-Type chains

- 10 and 11 speed compatible chainrings - Design and rigidity adapted to ZED 3 cranksets - Ultra light chainrings - Fluid, fast and accurate gear changes - Use chainring pairs for perfect compatibility

- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Specially designed tooth profiles for improved wear - More durable finish - Bolt Circle Diameter (BCD): 107 BCD - Speeds: 12 - Material: Aluminum

Make SRAM 1x even better with the simplicity of the SRAM X-SYNC Direct Mount chainring. Engineered in Germany, the new Direct Mount rings brings lighter weight and greater simplicity to XX1, X01, X1-1400, and GX-1400 cranksets. SRAM’s Direct Mount rings give riders the perfect opportunity for a serious upgrade. - Fully CNC AL rings - X-SYNC technology - Lighter weight than spider version (~25-50g depending on size) - Offset: 0mm (BB30), 6mm (GXP)

- Shimano, Tiagra FC-4703, Chainring, Teeth: 30, Speed: 10, BCD: 74, Bolts: 4, Inner, Steel, Grey, Y1RD30000

SRAM's X-Sync Road Chainrings are designed for provide maximum control when used with AXS road cranksets. - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Can be installed with a single tool, making gearing changes a breeze

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Eagle Technology creates the smoothest, quietest, longest lasting and most efficient drivetrains SRAM has ever made. The radical new look and feel of the X-SYNC 2 Eagle chainring is a direct result of SRAM drivetrain engineers studying the performance and wear characteristics of thousands of X-SYNC chainrings. The longer, positive-rake tooth shape has been designed to work perfectly with Eagle chains to increase chain retention and overall pedaling efficiency, while decreasing friction, noise, and wear. The complete Eagle system—crankset, chainring, chain, shifter, derailleur and cassette—is designed, tested, and proven to deliver the ultimate mountain bike drivetrain. Put simply, Eagle is capable of revolutionizing the ride for all riders on every kind of terrain. - Designed to be used with Eagle chain - Material: Steel

Designed specifically for use e-mtb drive systems, SRAM’s XX T-Type direct-mount rings offer light weight with optimal retention performance needed for e-mtb. - Steel and Aluminum construction

A QUICK-CHANGE DIRECT MOUNT CHAINRING SYSTEM Switch was developed to reduce the cost of replacement chainrings, increase compatibility with new offsets and to make the process of changing your chainring much faster and simpler. - Cheaper Replacement Cost - Replacement rings are a fraction of the cost of a complete direct mount chainring - Quick Change - Replace your ring in less than an minute, using only a 4mm hex key. Tailor your gearing to the terrain that you're riding - Enduro World Series Champion Winning Narrow Wide tooth profile keeps your chain in place on the roughest terrain - 4 Ring Sizes (28, 30, 32, 34T) - 2 Profiles - both Round and Oval - 12 speed ring designed to work with all 10, 11, and both Shimano Hypergilde+ 12 and SRAM Eagle 12 speed chains. - Get ultimate traction with Oval rings by smoothing out the torque you deliver to your rear tire SPECS - Material: 7075-T6 Aluminum

Improve chain retention, reduce drivetrain wear, and keep your bike running smoothly with a fresh 104 BCD chainring. We’ve designed the new 104 BCD ring to accommodate the added power and increased load from E-Bikes. The tooth profile eliminates chain drop and sheds mud. A simple upgrade you’ll notice every ride. - Narrow-wide teeth prevent unwanted chain drop - Perfect chainline with 2mm shims included with 32T and 34T rings (30T rings have built-in offset). For 2x crank conversions, shims between the crank and ring get you back to an ideal 49-50mm chainline - Excellent mud-shedding performance for extended ring life - Compatible with SRAM and Shimano 12-speed chains - Made from 7075-T6 aluminum alloy - Third-party online sales are strictly prohibited by the manufacturer

Our Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought-after narrow-wide tooth design provides excellent chain retention without a chain guide - Perfect for 1x setups and compatible with 9/10/11, and 12-speed systems. 9-speed drivetrains require a 10-speed chain - For SRAM DM Boost cranks, 3mm offset for a perfect 52mm chainline - For SRAM DM cranks, 6mm offset for a perfect 49mm chainline - CNC'd in Canada from 7075 aluminum with laser-etched graphics