Tubes

Developed alongside World Cup mechanics and world champion racers. Peaty’s Holeshot Tubeless Sealant is packed full of biodegradable fibres & sealing particles to give a fast and strong seal. Using the latest fast-acting latex, our water-based sealant is ammonia-free, non-hazardous and lasts up to 6 months in the tyre in temperate climates*. It won’t ball up in the tyre and is easily washed out. Our biodegradable fibres and particles bind together with the fast-acting latex to create a clot (like platelets in your blood) to quickly & effectively seal holes and tears up to 6mm. Key Features: - Biodegradable sealing fibres - Biodegradable platelets - CO2 compatible - Seals up to 6mm holes - Operating pressures: 15 to 120 psi - Operating temperature: -20°c to +50°c - Seals porous tyres and bead/rim gaps setup Setup Instructions: Always ensure you have tubeless ready rims and tyres. For best results use with Peaty’s Tubeless Rim Tape and Peaty’s Tubeless Valves. 1. Shake the bottle vigorously before every use to ensure an even distribution of fibres and particles. 2. Rinse away any old sealant from the tyre and dry off completely. For brand new tyres degrease, rinse and dry the internal carcass to remove factory mold release agents and other contaminants. 3. Seat your tyre onto the rim and inflate initially with no sealant, using a track pump, inflator or compressor to pop the tyre bead fully onto the rim. 4. Deflate the tyre and, with the valve at the three o’clock position, use the flexible injector pipe provided to inject the desired amount of sealant directly through the de-cored valve. 5. Re-insert the valve core and re-inflate the tyre to desired pressure. 6. Distribute the sealant around inside the tyre by spinning the wheel and tapping the tyre on the floor. 7. Listen for any air leaks and orientate the wheel so that the sealant flows around the inside of the tyre to the area required. Continue doing this until you can’t hear any more air loss † 8. Wash away any excess sealant that may have found its way to the outside of the tyre or rim with water. 9. Check tyre pressures and ride! Recommended minimum quantities per tyre: - Road 30 - 45ml - CycloCross 60 - 75ml - 26” MTB 60 - 80ml - 27.5” MTB 70 - 90ml - 29” MTB 100 - 120ml For wider rim / tyre combinations and / or additional puncture protection we recommend adding up to 30ml more sealant to the above quantities * Always check sealant regularly and top up as required † If a seal can’t be made, add more sealant in increments as required

"Peaty's unique single-sided fork design allows for multiple plug sizes to be easily rolled into the dip of the fork and pushed straight into the tyre. The open side to the fork then allows for the tool to be easily pulled back out of the hole without pulling the plug out with it. Made from high quality 316 Stainless steel, the fork is designed to be as short as possible to reduce the chance of you puncturing your rim tape when inserting a plug. The fork has also been designed with a reaming texture on the shaft, to clean out punctures before plugging, and to be as slim as possible, so it doesn’t widen the size of the hole already there. Shrinking down to a tiny 65mm x 19mm, this tool has been designed to easily fit into your pocket or slot into a tool wrap or backpack. With knurling on the tool base and ribbing on the lid, you shouldn’t have any issues gripping the tool, even in the muddiest of conditions. Simply unscrew the lid and thread it onto the rear of the tool to make a sturdy handle to hold onto while inserting the plug. This pack includes three thick (3mm) plugs and three thin (1.5mm) plugs. These plug sheets can be neatly wrapped around the fork and stored neatly inside the compact water-sealed body. Holeshot refill plug sheets also sold separately packaged with cardboard header cards & in biodegradable bags. KEY FEATURES - Available in 12x Chris King colours - Quick and easy to insert tyre plugs. With our unique single-sided fork design, you simply push and roll the plug into the hook of the fork - With no tight gap to squeeze through, the plug is far less likely to pull back out when the tool is extracted the fork is sharp tipped & as slim as possible so it doesn’t widen the size of the - hole already there - Fork made from 316 stainless steel - Body made from anodised 6061 aluminium - Knurled body and ribbed lid / handle for extra grip - Weather sealing o-rings make the tool waterproof when assembled - Each kit comes with one sheet of 3x 1.5mm and one sheet of 3x 3mm plugs"

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

With design, sustainability & quality running right to the core, there’s only one company we could work with on our valve colours - Chris King! With our valves for life guarantee and their stunning colourways, your bike is in for a real treat for years to come. Made from premium lightweight, high strength 7075 aluminium, Peaty’s MK2 Tubeless Valves fit most tubeless setups from MTB to road and cyclocross, including carbon, enduro and DH rims. Our unique x-cut base has been designed to work with all tyre inserts. The channels cut into the base of the valve allow air and sealant to pass through when inserts are pushed up against them. Unlike most other insert-compatible valves, our valves have a ‘straight-through’ design so there’s no reduction of sealant or air flow when tyre inserts are not used. Fitting couldn’t be easier. integrated o-rings prevent the lock rings from scratching your precious rims and large soft rubber bases easily create an airtight seal. Designed by riders, for riders. Our valves come as standard with an integrated valve core remover cap and spoke key cap (for standard 3.4mm spoke nipples). This makes tightening loose spokes and topping up with sealant a breeze, either in the workshop or out on the trails. Crushed a rubber or snapped an o-ring? No problem, check out our service kits to spruce up your valves when swapping to your next set of wheels or new bike. Instructions (1) Remove valve cap, o-ring and lock nut (2) Insert valve through valve hole in rim (3) Push the o-ring onto valve stem (4) Thread the lock nut onto valve stem (5) hand tighten lock nut until firm (6) Screw on valve cap

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube. - Valve Length: 40mm

50 hard wearing carbide tip studs clad in a galvanized steel base. Comes with tool for easy insertion. In order to ensure that spikes are permanently fixed, tires should be run in for about 40km on asphalt, while avoiding any fast acceleration or heavy braking.

Hurricane rolls fast and noiselessly, offering sufficient traction for short off-road excursions.

The cargo tire for the combination of on and off-road. - Perfect choice outside urban areas as Smart Sam's tread ensures good rolling resistance and safety off-road - Suitable for very high loads - Most secure puncture protection for the cargo bike due to the six-layer 67-EPI Super Defense carcass - Addix-E compound - Performance line - E-50 - 945g

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant. - Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill - New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts - Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess - Hose plug included for hanging on your workbench or mess-free storage in your toolbox

Stan’s unveiled the Dual Action Repair for Tubeless (DART) Tool in 2019, ushering in the first repair plug designed specifically for tubeless bicycle tires, rather than a scaled-down version of what was available in the automotive and motorcycle world. Subsequent refinements made way for the tool’s rerelease as the Original DART Tool in 2025, introducing a stainless steel insertion rod accompanied by an improved DART developed through the first tool’s lifespan. By using a flexible, laser-cut material, the DART conforms to nonuniform puncture shapes caused by the jagged and sharp edges of debris and obstacles found on trails, roads, and paths. Treated with a reactive solution, the DART bonds with liquid sealant on the inside of a tubeless tire to form both a chemical and mechanical seal to permanently bond a puncture too large for tubeless sealant to repair on its own. Complete with two DARTs, the tool weighs only 15-grams and fits comfortably in any small pack pocket. For added convenience, the base of the molded plastic tool body features a Presta valve core remover to aid in-the-field sealant topoffs with either a 60ml or 120ml bottle of Stan’s Original Tubeless Sealant. - Includes two DARTs, refills sold separately - Repairs punctures and slices too large for sealant alone to seal - Woven, laser-cut material easily conforms to nonuniform puncture shapes - Base of tool features molded Presta core tool for sealant top-offs - Clear caps keep DARTs clean and unthread for quick use

Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires. - Suitable for use in tubeless tires and standard tubes - Designed to seal punctures up to 1/4" - Stable down to -30 degrees Fahrenheit - Non-hazardous, non-corrosive, non-toxic - Contains natural latex

Thin, low viscosity liquid with improved sealing capabilities over the standard NoTubes sealant. - Twice the sealing crystals compared to standard NoTubes sealant - XL crystals and standard crystals combine to seal larger punctures - Stable down to -30 degrees Fahrenheit - Not compatible with injectors or through valve cores

- Create an air tight seal for BST rims - Can also be used as a lightweight rim strip for any rim

These tubed Armour inserts protect your wheels against hard hits and punctures. Armour protects with up to 15mm at it's thickest point and it wraps nearly 360° around your tube. With Armour protecting your tube, you don't have to worry about tire punctures and you can run at lower PSI to increase your traction and handling. • Single unit - can be used for front or rear • Easy installation • Reduces punctures risk • Protects your rims from impact and sharp object penetration • Sidewall protection • Ideal For E-bike and MTB • Minimum 19mm inner rim width

- High quality fat bike inner tube - Standard wall construction - Presta Valve

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

Lighter, more compact, and more durable. Yep, you get all three. WTB introduces the NanoAir TPU (Thermoplastic Polyurethane) tube. It’s compact, and packs down to one third of the size of a traditional tube. Just think of the extra things you can fit in your pack; a beverage, snacks, maybe even a snack for your friend that always forgets one, yea you know the one. It’s light. Like we mean really light. 60% lighter that (cough cough) paperweight you have been lugging around. “But it’s so light,” you say, “how is that better than my paperweight tube?” Don’t worry, these TPU tubes are tough, with a special construction/layup of material these are more durable than traditional butyl tubes. Having one of “those days,” and you ride through a patch of thorns and get another flat? Don’t worry, we added a few extra TPU patches to keep you rolling. Compact The NanoAir TPU Tube is 1/3 the size of a traditional butyl tube. LIGHT 60% lighter than traditional butyl tubes. Patches included Two Glue-Less TPU Patches Included with every TPU tube. Quick and easy repairs on the road, or trail. 48mm Presta Valve All NanoAir tubes come with a 48mm Presta valve. Light and Compact It’s light. Like we mean really light. 60% lighter than (cough, cough) paperweight (butyl tube) you've been lugging around. The NanoAir TPU tube is tiny. It packs down to one third of the size of a traditional tube. Just think of all the extra things you can fit in your pack; a beverage, snacks, maybe even a snack for your friend that always forgets one, yea you know the one. Why choose a NanoAir Tube over a Butyl tube? When it comes to inner tubes, the material you choose can significantly impact your cycling performance. The WTB NanoAir TPU Tube is revolutionizing the cycling world, offering a host of benefits that far surpass traditional butyl tubes. Whether you’re hitting gravel roads, mountain trails, or embarking on bikepacking adventures, the NanoAir TPU tube is the ultimate upgrade.

It’s all in the name, ThickSlick. Made with a burly casing designed to withstand the roughest urban conditions, while the no-nonsense, slick design provides the bite you need in the concrete jungle. Need more rubber? The nearly indestructible Flat Guard level, with its Urban Armor Casing and added rubber everywhere, provides optimal protection to contend with any city streets. It's no one wonder why this tire has a cult following among couriers, those not wanting to deal with flats, and value-conscious consumers. ThickSlick Benefits: - Puncture Protection: The thicker a tire, the harder it is for glass, pins, staples, and other urban unpleasantries to worm their way in. - 2x the Rubber: Twice the rubber tread equates to twice the lifespan of a tire. This means your price is 50% off the competition. - Smoother Ride Quality: Twice the rubber makes for a smoother ride through the natural absorption qualities of rubber. - Usage: Urban, Recreation, Utility - Conditions: Road

Tight enough tread spacing for high speed, drag-free onslaughts, yet blocky and tall enough to really dig in when it comes time to slam on the brakes. A rounded profile and staggered, supportive side knobs keep clamoring for traction even as the trail loses its camber. Most often used as a rear tire, the Trail Boss also keeps the front in check on hardpack trails. Want to go out and own it? Be the Trail Boss. Usage: XC / Trail / All Mountain Conditions: Dry to Damp / Hardpack to Loam - 29 x 2.25 Comp Tube-Type: 967g, DNA compound

Nano 40 is built for speed. A nearly uninterrupted centerline provides swift efficiency on hardpack terrain while staggered outer knobs allow you to stay on the gas while hammering up chunky climbs or hanging on through loose gravel corners. The high-volume 40mm casing allows for lower tire pressures and a smoother ride while still reducing drag and rolling resistance. This makes for an all-out gravel destroyer that still appeases those clamoring for a truly big cyclocross tire. Everybody's irrefutable favorite, 'nough said. SG2 PUNCTURE PROTECTION: This tire is available with our all-new SG2 Puncture Protection, which is a lightweight nylon insert that provides bead-to-bead coverage and ensures every area of the tire is defended against slashes and punctures. As events become progressively rougher and cyclists pedal farther, gravel gets tougher. It only makes sense for gravel tires to become tougher as well. - Nylon fibers have a flat profile, which reduces the amount of rubber needed to fill the gaps between fibers and minimizes weight. - Protected SG2 gravel tires feature a 120tpi casing, which improves suppleness compared to a traditional 60tpi tire. - SG2 was specifically designed to be a puncture protection layer, but it also improves air retention and eliminates seeping at the sidewall. FEATURES: - Minimal rolling resistance due to raised, consistent centerline tread. - Long, staggered knobs provide steadfast traction without cutting down on speed. - TCS Light/Fast Rolling versions of the Nano 40 tire provide ultimate tubeless reliability for gravel or cyclocross racing. - Race and Comp level tires are designed to provide optimal performance at a competitive weight but must be used with inner tubes. Race and Comp level tires are not tubeless compatible.

Judge is our rowdiest rear tire…for loose, sketchy descents. Centerline knob groups alternate between long and wide to pair hard braking traction with the rolling efficiency you demand of a rear tire. Burly outer knobs provide the support needed to keep them digging while slapping berms or spraying loam. We optimized the Judge for wide rims to provide a flatter tire profile that makes the outer knobs easy to find while cornering. The Judge keeps everything in order, whether dry and loose or wet and sloppy. - Massive side knobs and a beefy overall design that grabs in every direction - Designing tires around wide rims provides additional support while also bolstering sidewall protection through ample tread overhang - Ideally paired with a Vigilante 2.50 or Verdict 2.50 on the front

- Midsize, well-spaced, square knobs with alternating staggered center line of single and dual knobs - Round overall profile with ramped knobs rolls well and sheds dirt and mud efficiently - Siped knobs provide plenty of edges for gripping rocky or uneven terrain - Light - Lighter weight compound conforms to trail objects while still providing a happy balance between low rotational weight and reliability - HG - High Grip, 45a durometer, glue-like conforming rubber over a firmer 60a durometer supportive base for uncanny traction - TT - WTB`s new triple compound, TriTec, featuring a hard base level, medium center knobs, and softer shoulder knobs for improved traction and performance - SG2 - Defends all surfaces of a tire by providing an uninterrupted layer of puncture protection from bead to bead

Searching for the ultimate do-all plus tire? Meet the Ranger...bikepacking approved, trail ready. Weight-optimized to outperform in all environments and excel on longer rides—dry to wet, hardpack or loam, the Ranger isn’t intimidated. - Excellent do-all tire that excels in various conditions ranging from hardpack to wet trails - Multi-directional siping provides increased traction whether accelerating, braking, or cornering - Huge variety of size and rubber types to choose from

Judge with SG1 is our rowdiest and toughest rear-focused tire. Centerline knobs alternate between long and wide to provide the hard braking traction and efficiency required of a rear tire. Burly outer knobs provide support and dig in to keep you glued threw off-camber corners. Judge features a flatter tire profile than most other tires, which makes it easier to reach the outer knobs when cornering. The Judge keeps everything in order, whether dry and loose or wet and sloppy. SG1 puncture protection runs under the tread cap and has extended bead protection. Big Knobs, Big Sipes Massive knobs in every area of the tread prove that the Judge prioritzes traction above all else. Long, thick knobs till through rocky terrain without folding under heavy cornering forces. Each knob features full-length siping to essentially double the amount of knob edges contacting the trail. Flat-Top Profile The side-to-side tread arc of the Judge is "flatter" than most tires, which results in the side knobs engaging sooner while cornering compared to a tire with a rounder profile. This allows the side knobs to dig into the terrain quicker and deeper, which improves cornering traction on loose, off-camber trails. Rear-Focused Design Judge features wide, blocky knobs that maximize braking traction and improve the longevity of the tire. The side knobs overhang the sidewall of the tire to protect it from slashes while you're steering with the rear. We suggest pairing the Judge with a Verdict 2.5 or Vigilante 2.5 on the front. TCS Tubeless-Ready TCS (Tubeless Compatible System) is WTB's standardized tubeless system. These tires feature a TCS tubeless-ready casing, which nearly eliminates flats and allows lower tire pressures to improve traction and comfort over a traditional tube-type tire.

Judge with SG1 is WTB's rowdiest and toughest rear-focused tire. Centerline knobs alternate between long and wide to provide the hard braking traction and efficiency required of a rear tire. Burly outer knobs provide support and dig in to keep you glued threw off-camber corners. Judge features a flatter tire profile than most other tires, which makes it easier to reach the outer knobs when cornering. The Judge keeps everything in order, whether dry and loose or wet and sloppy. SG1 puncture protection runs under the tread cap and has extended bead protection. - Massive knobs in every area of the tread prove that the Judge prioritizes traction above all else. Long, thick knobs till through rocky terrain without folding under heavy cornering forces. Each knob features full-length siping to essentially double the amount of knob edges contacting the trail. - The side-to-side tread arc of the Judge is "flatter" than most tires, which results in the side knobs engaging sooner while cornering compared to a tire with a rounder profile. This allows the side knobs to dig into the terrain quicker and deeper, which improves cornering traction on loose, off-camber trails. - Judge features wide, blocky knobs that maximize braking traction and improve the longevity of the tire. The side knobs overhang the sidewall of the tire to protect it from slashes while you're steering with the rear. WTB suggests pairing the Judge with a Verdict 2.5 or Vigilante 2.5 on the front. - TCS (Tubeless Compatible System) is WTB's standardized tubeless system, which nearly eliminates flats and allows lower tire pressures to improve traction and comfort over a traditional tube-type tire - SG1 puncture protection runs beneath the entire tread cap making the tire more resilient against sharp objects lurking in the dirt, combined with Inner Peace + technology, tripling the height of it’s apex bead protection for SG1. This enhancement not only shields the tire bead from damage, but also significantly bolsters the sidewall structure - An updated High Grip compound not only increases tread longevity, but also improves grip at the same time, especially in wet conditions - TriTec blends three distinct rubber compounds to provide different levels of traction, support and durability based on their placement within the tread. High durometer rubber provides a foundation for the entire tread pattern and even extends slightly into the base of each knob to provide additional support below the softer compounds used in the remainder of each knob. Center knobs feature a medium durometer compound to provide traction and durability without sacrificing rolling efficiency, while outer knobs feature the softest compound for maximum grip and slow rebound characteristics - TCS Tough Casing features two full layers of casing span bead-to-bead to ensure every surface of the tire is more resistant to punctures, provides additional sidewall support while cornering and increased traction by running lower pressures than would be possible with thinner, single-ply casings. TCS Tough tires are the sure bet for aggressive trail, enduro, gravity, and e-bike riders who want ultimate peace of mind out on the trail

- Shim adds support to Presta stem used in a Schrader rim

Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves. - For use with threaded Presta (non-removable core) tubes - Knurled end to keep pump from slipping - Available in all lengths to match all Zipp wheels - 3mm hex broach in the barrel to guarantee a perfect seal when tightened