Wheels

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 130mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 141mm - 1 axle per bag

A tough, tubeless-compatible 27.5 disc wheelset in new-school boost thru-axle spacing - Pinned construction double wall rim with new-school 29mm internal width, tubeless compatibility, offset/asymmetrical construction, and hook-less construction - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer and more reliable wheel - Joytech Boost thru-axle alloy 6-Bolt hubs w/ serviceable cup and cone bearings - Shimano steel freehub: 8/9/10/11sp MTB compatibility - 6-Bolt disc compatible only - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - 32H/3X lacing - Presta drilling - High-pressure rim tape included (non-tubeless) - Tubeless compatible - Weight: 1076g

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Front 9mm x 1 axle - Cone Wrench Size: 13mm - Threads: 9mm x 1 - Cone Diameter: 15.0mm - Dust Seal Diameter: 22mm - Length: 12.7mm - 1 cone per bag COMPATIBLE HUBS: - Shimano Deore LX HB-M570 Front - Shimano Deore XT HB-M750 Front

A tough, tubeless-compatible 29/700c disc wheel built around Center Lock hubs and shipped with handy 6-Bolt adaptors for dual compatibility straight out of the box. - Pinned construction, tubeless-ready, asymmetric/offset double-wall rim with 24mm internal width is suited to a wide range of tire widths perfect for either MTB or urban use - Asymmetric rims w/offset spoke holes for better triangulation of spoke angles and balance of tensions in a wheel build, resulting in a stronger, stiffer, and more reliable wheel - Joytech 100mm OLD alloy QR Center Lock hub w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (black) - Weight: 1003g

Hub Adapters for all Oozy hubs and 2016 Spike hubs.

An affordable and clever dual-duty rim and disc brake compatible 26-inch wheelset that combines MTB hub spacing with screw-on freewheel compatibility for a wheelset that's perfectly suited to trekking, MTB, and urban use. - Alex Rims Z1000 pinned construction single-wall rim with 20mm internal width suitable for a wide range of tire widths & brushed sidewall - Joytech 6-Bolt disc alloy nutted hub w/serviceable cup and cone bearings - Anodized brake track for clean looks when used with a disc brakes - Plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1064g

Tough-yet-affordable single wall rear 20-inch (406mm ISO) coaster wheel that uses a much higher build standard and materials than many original factory-equipped wheels. - Alex Y303 pinned construction single wall rim with 24mm internal width for an excellent pairing with modern high-volume tires - Anodized brake track for clean looks when used with coaster only - KT 305R Nutted 110mm OLD steel coaster hubs w/serviceable cup-and-cone bearings - Compatible w/3-spline coaster hub sprockets; 16T & 18T included for gearing options - Straight gauge 14G/2.0mm Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1329g

The 20mm Boost Adapter adapts Spike/Oozy boost front hubs (15x110mm) to Boost DH (20 x110) for use with Boost DH forks. - Material: alloy - Weight: +/- 26g - Compatible with Spank Spike and Oozy front hubs - Includes 2x front hub end caps

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs, and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Shimano / Japanese rear hubs with 126mm spacing - Type: Hollow Axle - Threads: 10mm x 1 - Diameter: 10mm - Length: 137mm - 1 axle per bag

A durable 32H aero track wheel in stealth black finish w/new-school 17mm internal width and flexible fixed/free rear compatibility that's fast enough for the velodrome and tough enough for the streets. - Pinned construction double wall rim w/aero 30mm deep profile, wear indicator, and anodized matte black finish - CNC sidewalls with post-anodized finish for clean brakeless all-black stealth looks - Joytech high flange nutted axle 120mm alloy nutted hubs w/100% serviceable cup and cone bearings - Fixed/free rear threads for compatibility with either 1.375" x 24TPI screw-on singlespeed freewheel or fixed sprocket & lockring (stepped 1.375" x 24TPI/1.29" x 24TPI) - Reinforced head plain gauge 2.0mm SUS304 Stainless Steel spokes w/12mm brass nipples - 32H/3X lacing - Presta Drilling - Axle nuts, 16T cog, high-pressure rim tape included - Weight: 1183g

E-bikes add to the riding experience by simply providing more for less. More distance, more laps, more climbs and more descents. With all those "mores" also comes more weight continually bashing on the components of an e-bike. In order to overcome the increased forces induced by the technological progression of modern e-bikes, we designed our HTZ rims with more material in every area of the rim prole. Every wall of the rim is 25-30% thicker in comparison to those on our standard rims, which we then paired with our proven I-Beam center support to ensure no beating was too great for these rims. All HTZ rims are TCS 2.0 tubeless, feature asymmetrical spoke drilling, and are available in widths ranging from i23 to i35 in order to provide options for e-bikes ranging from e-assist gravel bikes to dual-crown downhill bikes that no longer need a truck to be shuttled. FEATURES: - Capable of withstanding the forces of a modern e-bike. - 4D angled spoke drilling eliminates binding and lateral loading and disperses tension more evenly over a greater area. - Symmetric outer profile provides equal dissipation of impact forces on both sides of the rim while asymmetric spoke hole drilling allows for more even spoke tension and increased wheel strength. - Disc-brake only. - TCS 2.0 Tubeless ready and comes with a preinstalled Solid Strip, which lies beneath the tubeless tape and prevents sagging at the spoke holes, creating a smooth interface between the rim and tire bead. This prevents air from escaping around the bead and therefore requires less air volume and pressure to mount a tire. Solid Strip also protects the airtight tubeless system from being punctured in the case of a broken spoke. TCS 2.0 creates a more robust, easily installed, and dependable tubeless system. USAGE: E-bike

- An ultra-wide, high-performance alloy rim, weight-optimized for Enduro, Trail, and All-Mountain use - 32 holes with an inner width of 35mm and outer width of 39.5mm provide ultra-wide support for Plus-Size and high-volume tires - The corrugated rim center adds exceptional strength, making it more rigid and allowing the rim to be wider without adding material - Shot-peened finish to increase fatigue life and make it more durable

The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

- Asymmetric Bead Socket Technology brings Stan's legendary easy inflation and the most reliable airtight seal to wider, offset carbon rims - Custom carbon layup equalizes impact forces on both the long and short sides of the rim, making both stronger - Asymmetric rim shape with offset drilling improves bracing angle and balances spoke tension to create a stronger overall wheel - M-pulse hubs - 250lb Recommended Maximum Rider Weight

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Compatible with Shimano Rear 10mm x 1 axle - Shimano Right Rear Cone - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 16.9mm - Length: 9.5mm - 1 cone per bag COMPATIBLE HUBS: - Tiagra 4400, 9 Speed Rear - 105 SC 1056, 8 Speed Rear - 105 SC 1055, 7 Speed Rear - 105 SC 1051, 7 Speed Rear - RX100 A551, 8 Speed Rear - RSX 410, 7 Speed Rear - XT M737, 8 Speed Rear - XT-II M732, 7 Speed Rear - Deore LX M565, 8 Speed Rear - Deore LX/Mtn LX M550, 7 Speed Rear - STX-RC MC38, 8 Speed Rear - STX-RC MC30, 7 Speed Rear - STX MC32/33, 7 Speed Rear - Nexave IMC50, 8 Speed Rear - Alivio MC18, 8 Speed Rear - Alivio MC12, 7 Speed Rear - Acera-X MC290, 7 Speed Rear - Altus RM-40, 7 Speed Rear - FH-R080 Silent Hub, 8 Speed Rear - FH-R050 Silent Hub, 7 Speed Rear

Replacement Alloy Axle Shaft for HEX J-Type & Gravel 135/142mm Rear Hubs. Compatible with: - HEX J-Type and Gravel 135/142 rear wheels Not compatible with: - Boost or 150/157 rear wheels - SPIKE/OOZY/SPOON hubs

- Micro Spline freehub for Oozy/Spike rear hubs - Material: steel

Replacement Alloy XDR (XD-Road) Freehub Body, for all HEX Rear Hubs. Includes spacer ring to also allow the use of MTB cassettes. Compatible with: - All HEX J-Type, Straightpull, and Gravel rear wheels Not compatible with: - SPIKE/OOZY/SPOON hubs

The SPANK Flare 24 OC Vibrocore Rim is a disc-specific, tubeless-ready clincher rim optimized for Gravel, Adventure, and MTB Cross Country use. The Vibrocore inner well reduces the transmission of harmful vibration frequencies enhancing comfort on those long days on the bike. The OC edition of the SPANK Flare 24 features an asymmetric profile to improve spoke tension balance between drive and non-drive side spokes. - Disc-specific, tubeless-ready clincher rim, with Vibrocore, optimized for Gravel, Adventure, and MTB Cross Country use - Vibrocore inner well reduces the transmission of harmful vibration frequencies, improving rider comfort and increasing the fatigue life of the rim - Low-profile 16.5mm depth and wide 27.5mm outer width enhance Radial Compliance, improving traction while reducing negative feedback to the rider - Asymmetric, 24mm inner width profile improves spoke tension balance between drive-side and non-drive-side spokes and optimizes gravel/XC tire spread - Bead Nip tubeless bead seats provide reliable tubeless performance even at low pressures

Replacement Pawls for all Oozy hubs.

A tough, no-nonsense workhorse 26-inch rim brake wheel with MTB hub spacing that's perfectly suited to a wide range of applications from MTB to urban/commuter/trekking. - Pinned construction double-wall rim with generous 20mm internal width suitable for a wide range of tire widths - Stainless Steel eyelets & CNC machined sidewall w/wear indicator - Joytech alloy QR hub w/serviceable cup and cone bearings - Shimano steel freehub body: /8/9/10/11sp MTB cassette compatibility - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black) w/12mm brass nipples (silver) - Weight: 1198g

A durable & classic 32H 700c road wheel with a new-school 18mm internal width rim. - Lightweight (485g) pinned construction low-profile double wall rim w/CNC machined sidewalls, wear indicator, and anodized matte black finish - Joytech alloy QR hubs w/serviceable cup and cone bearings - Reinforced head plain gauge 14G/2.0mm SUS304 Stainless Steel spokes (black or silver) / 12mm brass nipples (silver) - 32H/3X lacing - Presta drilling - QR levers & high-pressure rim tape included - Not tubeless compatible - Weight: 989g

Steel Shimano HG and SRAM XD Standard Freehub body for OOZY Trail R142/135, SPIKE R135/142, or SPIKE DH R150/157 Rear hubs. - Compatible with all OOZY hubs and wheels. - Compatible only with SPIKE and SPOON wheels (135mm and 150mm) produced in 2016 or later (with SPIKE hubs).

An affordable and classic-looking single-wall 26-inch wheel that uses MTB hub spacing and thread-on freewheel compatibility that's perfectly suited to trekking, light MTB, and urban use. - Alex Rims Z1000 pinned construction single wall rim with 20mm internal width suitable for a wide range of tire widths & ground sidewall - Joytech alloy nutted hubs w/serviceable cup and cone bearings - Conventional thread-on freewheel fitting (7/8/9/10sp compatible) - Straight gauge 14G/2.0mm SUS304 Stainless Steel spokes (silver) w/12mm brass nipples (silver) - Weight: 1068g

Hand-built to A-Class specifications, the 359 wheel with SPANK Hex Drive hub is the premium lightweight performance offer from the SPANK wheelhouse and is trusted by pros on the Enduro World Series circuit. - Moderately low 19mm profile height and wide width balances the benefits of radial compliance with high lateral stiffness and predictable handling - Radial Compliance improves traction over bumps and chatter while reducing negative feedback to the rider. Performance and comfort are improved - 30.5mm inner width is extremely versatile, fitting tires from 2.0" to 2.6", and even allowing + size tire use without negative squaring off of tire profiles - Bead Bite tubeless hooks enhance tubeless performance and tire security, even at lower pressures

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech 10mm x 26, rear hub - Compatible with 10mm x 26 axle - Cone Wrench Size: 15mm - Threads: 10mm x 26 - Diameter: 17.0mm - Length: 13.8mm - Note: O-ring / seal not included. - 1 cone per bag COMPATIBLE HUBS: - JoyTech 10mm x 26, rear hub - Taiwanese hubs with 10mm x 26 axle

Front end cap conversion kits for NoTubes Neo and Neo Ultimate - SealLock end caps feature a low friction U-cup seal that snaps into place